Door materials and styles

Different door finishes inside and outside

Two faces of one entrance may sit beside entirely different finishes. Choose them side by side on the drawing and check the connecting edges.

Sample each face beside its own surroundings

Try the exterior sample against siding and trim, then view the interior one against the wall, floor and other doors. See how they look with the entrance open and both finishes visible. If a colour looks good on both sides, compare that as a simple option. If you prefer a split finish, ask whether the exact door can use the specified pair and which coating system will be applied to each face.

Decide how the transition and hardware will look

Ask which colour is seen on the hinges, latch edge and ends when the door is open. Check what finish will surround the glass if there is a lite. Compare handle and trim samples on both faces. Ask whether the exposed surfaces have different care requirements and how you would identify the right touch-up materials for each. Keep the frame colour on the drawing too so it gets compared with the leaf on both sides.

Write the finish pair in full

Record the interior and exterior colour, sheen and edge treatment on separate lines. Keep a physical sample or the approved finish code for both faces.

Put two materials side by side

Compare finish, upkeep and what to check against your opening.

Compare materials